RCA RC5910P, Руководство пользователя, Страница: 67 / 80

65
Reference
This Is Important!
You must continue pressing the TV
button while you enter the code.
Let’s say you have a Zenith TV. To
program the remote to operate the TV
you would:
Press and hold the TV button while you
enter the first code listed for Zenith in
the TV Codes column.
Release the TV button. Press ON•OFF to
see if the TV responds. If it doesn’t,
follow the same steps, but enter the
second code instead of the first.
STOP PAUSE
TV
ON OFF
PLAY FORWARD REVERSE
REPEAT GO BACK
CH
+
CH -
V
O
L
V
O
L
PLAY MODE MUTE
INFO
MENU
OK
CLEAR
GUIDE
ANTENNA
1 2 3
4 5 6
7 8 9
0
INPUT
DVD
MARKER
AUX ZOOM RANDOM -D
3
DISC
SUBTITLE AUDIO ANGLE
OPEN•CLOSE
Programming the Remote
The remote can be programmed to control most brands of remote
controllable TVs and A/V receiver/amplifiers. The remote is already
programmed to control most RCA, PROSCAN, and GE TVs and A/V
receiver/amplifiers.
Testing the remote
To determine whether the remote needs to be programmed, turn the
TV ON, point the remote at the TV, and press the TV button. Then
press POWER or CH ^ (channel up) or CH v (channel down) to see if
the TV responds to the remote commands. If not, the remote needs to
be programmed.
Entering Codes
To control a TV or A/V receiver/amplifier that is not from RCA,
ProScan or GE, you’ll need to enter the specific codes for the brand
of TV or A/V receiver/amplifier you have.
1. Turn on the TV to be programmed.
2. Look up the brand and code number(s) for the TV on the code
list in this section.
3. Point the DVD Player’s remote at the TV.
4. Press and hold the TV button on the remote.
5. Enter the code from the Remote Control code list (page. 66).
6. Release the TV button, and then press ON•OFF to see if the TV
responds to the command. If it doesn’t, try pressing the TV
button and then ON•OFF again.
7. If you get no response, repeat these steps using the next code
listed for your brand, until the TV responds to the remote
commands.
8. To program the remote to control your A/V receiver/amplifier,
repeat the steps above using the receiver rather than the TV. In
step 4, hold the AUX button rather than the TV button.
Note:
• This remote may not be compatible with all brands and models of
televisions.