27
Playing DVDs
Program Playback
Program playback lets you set up a specific order for DVD playback.
1.
With a disc inserted, but not playing, press PLAY MODE. “Reading
disc information, please wait” appears on the screen. When the
player is finished reading the discs, the PLAY MODE screen
appears.
Note: It’s normal for the player to take a while to read the disc
information.
2.
On the screen, each disc is identified by it’s type beside the slot
number it occupies. Press DISC (several times if necessary) to
highlight the first disc from which you want to select chapters to
program. The selected disc’s chapter numbers appear in the
Chapter box.
Note: If “– – –” is shown rather than a disc type, there is no disc in the slot.
3.
Use the right and left arrow buttons to highlight the first chapter
to add to the program and press OK. The selected chapter
appears in the Program Order box.
4.
Repeat Step 3 for each chapter to add to the program from the
selected disc. Repeat Steps 2-4 to add chapters from other discs.
Up to 20 chapters may be programmed at once.
5.
Press PLAY to begin playing the program.
Note:
•
To resume normal playback, press CLEAR and then press PLAY.
Deleting Programmed Chapters
•
To remove the last chapter that was added to the program, press
CLEAR. Each subsequent press of CLEAR deletes the next chapter
in the opposite order the chapters were programmed.
•
To remove all of the chapters from the program, hold down
CLEAR.
•
All programmed chapters are deleted when the disc is removed or
the DVD player is turned off.
Содержание RC5910P
