Chapter 3: Other Information
Chapter 3
29
•
Exterior influences such as lightning and static electricity can affect normal operation of this player. If this occurs, turn off the
player and on again, or disconnect and then reconnect the AC power cord to the AC power outlet.
•
Be sure to remove the disc, turn off the player and close the LCD screen when not in use.
•
Don’t place anything other than the disc in the disc slot.
•
Do not store the player in temperatures below +4˚F (-15˚C) or above +149˚F (65˚C).
Formation of Condensation
•
Due to sharp changes in temperature and humidity, condensation may form if warm air comes in contact with any cold parts
inside the player.
•
When condensation forms inside the player, it may not operate correctly. If this occurs, leave the player at room temperature
until the inside of the player becomes dry and operational.
•
If condensation forms on a disc, wipe the disc with a soft, dry cloth by moving the cloth from the center of the hole toward the
outer edge.
Handling Discs
•
Don’t touch the disc’s signal surfaces. Hold by the edges or by one edge and the hole in the center.
•
Don’t affix labels or adhesive tape to label surfaces. Don’t scratch or damage the label.
•
Do not use damaged (cracked or warped) discs.
Cleaning Discs
•
Dirty discs can cause reduced video and audio performance. Always keep discs clean by wiping them gently with a soft cloth
from the inner edge toward the outer perimeter.
•
If a disc becomes very dirty, wet a soft cloth in water, wring it out well. Wipe the dirt away gently, and remove any water drops
with a dry cloth.
•
Do not use record-cleaning sprays or anti-static agents on discs. Also, never clean the discs with benzene, thinner, or other
volatile solvents which may cause damage to the disc surface.