RCA HSDB2, Руководство по установке

Страница: 7 / 46

6 7
IMPORTANT! Handle the video doorbell carefully! Make
sure not to scratch its lens.
Connect the video doorbell to home power
(OPTIONS A & B)
9
OPTION A: If your home’s doorbell power wires are long enough
Loosen
Doorbell
camera
back
Terminals
Use the screwdriver provided in this package
to loosen the terminal screws on the back of
the video doorbell.
Terminals
Home
doorbell
wires
Tighten
Connect the doorbell power wires directly
to the terminals on the back of the video
doorbell. Loop each wire end around each
terminal on the back of the video doorbell.
Note: It doesn’t matter which wire you put on
which terminal.
Tighten the screws to hold the wires firmly in
place.
8
Remove the faceplate from the video doorbell
Before you mount it, take the faceplate
off the video doorbell—you’ll need
access to several items behind the
faceplate during setup.
IF YOU DON’T HAVE A CHIME BOX
You must use the resistor provided in this package to
connect the video doorbell to your home’s wiring. Follow
the instructions for OPTION B on the next page, including
the resistor instructions in the red box.
If you’re mounting to masonry or brick, insert
the provided anchors in the holes you drilled
before proceeding.
Align the holes on the mounting plate with the
holes you drilled.
Mount the mounting plate to the wall using the
screws provided.
continues on the next page...