RCA G32710, Руководство пользователя

Страница: 10 / 32

8 Chapter 2
Chapter 2: Using the Remote Control
STOP PAUSE
TV
ON OFF
AUX DVD SAT CABLE
PIP
SWAP RESET CH CTRL
PLAY FORWARD REVERSE
SOUND GO BACK
CH +
CH -
VO
L
VO
L
SKIP MUTE
INFO
MENU
OK
CLEAR
GUIDE
ANTENNA
1 2
3
4 5 6
7 8 9
0
WHO•INPUT
VCR1
REC•VCR+
VCR2
The Buttons on the Remote Control
PLAY Plays a videotape or disc.
REC•VCR+ When the GUIDE Plus+ program
guide is on the screen, press REC•VCR+ to
program your VCR to record a program. If the
remote is in VCR mode, press REC•VCR+ to start
recording.
RESET Resets original settings in several
control panels.
REVERSE Press REVERSE to go backwards on a
videotape or disc.
SAT•CABLE Puts the remote in SAT•CABLE
mode. If you set up Auto Tuning, pressing
SAT•CABLE tunes the TV to the correct channel.
SKIP If you press SKIP before you change the
channel, the TV waits 30 seconds and then goes
back to the original channel. Each time you press
SKIP, you add 30 seconds (i.e, if you press SKIP
two times before you change the channel, the TV
waits 60 seconds). Press CLEAR to cancel.
STOP Stops playing a videotape or disc.
SWAP Switches the main
picture with the PIP window.
VCR1 Puts the remote in VCR mode. If
you set up Auto Tuning, pressing VCR1
tunes the TV to the correct channel.
Arrow buttons (up, down, left, right) Use to
move through the on-screen menus. Also moves
PIP window to different areas on the screen.
INFO Displays channel information.
WHO•INPUT In TV mode, press to toggle
through the available Video Input channels. In
SAT mode, press to select available channel lists.
MUTE Lowers the volume to its minimum level.
Press again to restore volume.
ON•OFF Turns the TV on and off. When the remote is in
another mode and the remote is programmed to operate that
component, press ON•OFF to turn that component on and off.
VOL (up and down) buttons Decrease or
increase the TV’s volume.
TV Turns on the TV and puts the remote in TV
mode. Also displays channel information.
0-9 (Number buttons) Use to enter channel
numbers and time settings. To enter a two-digit
channel, press the two digits. To enter a three-
digit channel, press and hold the first digit for
two seconds until two dashes appear to the
right of the number, then add the second two.
AUX Operates the component you’ve
programmed the remote to operate with this
button. You can program this button to control a
cable box, audio components, a VCR, DVD player
or satellite receiver. If you set up Auto Tuning,
pressing AUX tunes the TV to the correct channel.
CH (up and down) buttons Scan up or down
through the current channel list.
CH CTRL (Channel Control) Selects the
picture window (main or PIP) that changes
when you press the channel up or channel
down button or the INPUT button.
CLEAR Removes any menu or display from the
screen and returns you to TV viewing.
DVD Puts the remote in DVD mode. If you set up
Auto Tuning, pressing DVD tunes the TV to the
correct channel.
FORWARD Press to advance a videotape or disc.
GO BACK Returns you to the previous channel.
GUIDE Displays the GUIDE Plus+ system; press
again to remove it from the screen.
OK Press OK to select a menu item that is
highlighted.
PAUSE Press to pause playback.
PIP (Picture-In-Picture) Brings up the
small Picture-In-Picture window. Press
again to remove the window.
VCR2 Puts the remote in VCR mode. If you set
up Auto Tuning, pressing VCR2 tunes the TV to
the correct channel.
ANTENNA Functions as TV/VCR button in VCR
mode and TV/receiver button in SAT•CABLE
mode.
L.E.D. Lights when you are
programming the remote.
MENU Displays the TV’s Main menu. Press and
hold for 2 seconds to display the GUIDE Plus+
system.
SOUND Displays the AUDIO PROCESSOR
menu.