12
Chapter 1
Connections & Setup
Jacks on the Back of Your TV
If you are connecting many components, please consult the manual that came with each
component for connection instructions. The picture of your TV’s back panel describes the jacks
on the back of your TV and what types of components that you can connect to these jacks.
When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right
Audio to Right Audio, etc.
TV
(back panel)
CABLE/
ANTENNA
VIDEO
R
L
AUDIO
IN
G-LINK
Audio and Video Input Jacks:
AUDIO R and L and VIDEO
Connect any of the following components:
• DVD Player
• Satellite Receiver
• Laserdisc Player
• VCR
• Internet Access Device
To watch the content from the component that’s
connected to the VIDEO Input Jack, press the
WHO • INPUT button on the remote (the TV switches
to the correct channel).
G-LINK Jack
Connect the end of the
G-LINK cable (provided) to this
jack. The G-LINK cable enables
the TV’s Guide Plus+ system to
interact with the cable box and/
or the VCR. A picture of the
G-LINK cable is on page 7.
CABLE/ANTENNA Jack
Connect the coaxial cable from
the VCR’s Output jack to this
jack. If you’re not connecting a
VCR, connect a coaxial cable
that carries the signal from the
antenna, cable, or cable box to
the CABLE/ANTENNA jack.
