18
Chapter 1
Connections & Setup
Tip
If you’re not sure which channel is the
cable box’s output channel, consult
the book that came with your cable
box or contact your cable company.
Step 2: Configuring for Cable
The next series of screens asks you about your cable setup. To supply your TV
with the correct TV program listings, the GUIDE Plus+ system needs to know if
your TV is connected to cable.
1.
If your TV is connected to cable, highlight
Yes
and press OK.
If your TV isn’t connected to cable, highlight
No
and press OK (
STEP 3:
Configuring for a VCR
appears).
2.
If you have a cable box connected to this TV, highlight
Yes
and press OK on
your remote control.
Note:
The next series of scr eens is ver y impor tant because the GUIDE
Plus+ system must find the cor
rect cable box infor mation in or der to
receive the cor rect TV pr ogram listings.
If you don’t have a cable box connected to this TV, highlight
No
and
press OK (
STEP 3: Configuring for a VCR
appears).
3.
Highlight the channel to which you have to tune your TV in order to see
cable programming, and press OK (a screen appears reminding you to
connect your G-LINK cable to your TV and cable box).
Notes:
Channel 03 is the most common.
Choose V ideo1/AUX if your cable box is connected to your TV with audio/
video cables instead of a coaxial cable. Go to page 7 for pictur
es of these
cables.