Using the TV’s Features
Chapter 3
37
1.
Press MENU (the
TV MAIN MENU
appears).
2.
Highlight
Channel
and press OK on your remote control.
3.
Highlight
Auto Tuning
and press OK.
4.
Choose which channel you would like to set:
Set VCR1 Channel
Displays a list that lets you set up the channel that the
TV tunes to when you press the VCR1 button on the remote.
Set VCR2 Channel
Displays a list that lets you set up the channel that the
TV tunes to when you press the VCR2 button on the remote.
Set DVD Channel
Displays a list that lets you select the channel that the
TV tunes to when you press the DVD button.
Set SAT/CABLE Channel
Displays a list that lets you set up the channel
that the TV tunes to when you press SAT•CABLE.
5.
Highlight the choice that matches the way you have the component
connected to this TV, and press OK.
The choices and a brief explanation follow:
Not connected
Choose this if you don’t have this particular component
connected to the TV, or if you don’t want the TV to automatically tune to the
correct channel when you’re using this component.
Channel 2
(SAT/CABLE only)
Component (satellite or cable box) is
connected to the CABLE/ANTENNA jack on the back of the TV, and you want
the TV to tune to channel 2 when you press the SAT• CABLE button on the
remote. Reminder: make sure the component’s Channel 2/3/4 switch is set to
channel 2. Usually this switch is on the back of the component.
Channel 3
Component is connected to the CABLE/ANTENNA jack on the back
of the TV, and you want the TV to tune to channel 3 when you press the
corresponding button on the remote. Reminder: make sure the component’s
Channel 3/4 switch is set to channel 3.
Channel 4
Component is connected to the CABLE/ANTENNA jack on the
back of the TV, and you want the TV to tune to channel 4 when you press the
corresponding button on the remote. Reminder: make sure the component’s
Channel 3/4 switch is set to channel 4.
Video Input 1
Component is connected to the VIDEO Input jack on the back
of the TV and you want the TV to tune to VID1 Input Channel when you press
the component button.
Note:
You should choose Video Input 1 for your VCR if you connected it to the TV
with audio/video cables.
TV MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
CHANNEL
2 Auto Channel Search
3 List and Labels
0 Exit
4 Auto Tuning
1 Signal Type
1 Not connected
2 Channel 2
3 Channel 3
4 Channel 4
5 Video Input 1
SET SAT/CABLE CHANNEL
Содержание F27443
Страница 48: ... This page intentionally left blank ...