RCA DSA112NW, Руководство по установке

Страница: 71 / 88

69
Final Approach
7. Locate the grounding wire that will extend from the
grounding block to the central building ground. Attach the
grounding wire to the grounding block by placing it through
the wire hole in the grounding block and tightening the
screw.
8. Route the grounding wire from the grounding block to the
central building ground, and connect to the central building
ground.
9. Ensure that the routing of both grounding wires are secure.
Here are a few important reminders:
• If you are routing the grounding wire along the ground,
make sure the wire is buried deep enough so that it will
not be damaged or uncovered.
• If you are routing the grounding wire above the ground,
the wire and the coaxial cable should be tied together
with cable ties every 3 to 6 feet. Then use cable clips to
secure the two to a wall or surface.
• Make sure you route the grounding wire in an area
where people or animals are not likely to come in contact
with the cable.
7
TO DISH
TO CENTRAL BUILDING GROUND
MESSENGER (GROUND) WIRE