16
EN
No power
• Ensure the car power adaptor is connected.
• Make sure that the unit is turned on.
The remote control does not
function
• Make sure the infrared remote sensor is
not blocked.
• Make sure the plastic sheet has been
removed from the remote control.
• Point the remote directly at the infrared
remote sensor on the unit.
• Replace the battery in the remote control
with a new one.
No Sound or only a very low-level
sound is heard
• The volume control is located on the side
of the unit - please try adjusting this.
• The unit is in pause mode. Press the
PLAY button to return to normal play
mode.
• The unit is in fast-forward or fast-reverse
mode. Press the PLAY button to return
to normal play mode.
• Make sure the AUDIO/VIDEO output
connections are correct.
• The DTS DVD cannot be decoded to have
speaker output.
• The unit is too hot, shut off the unit for 30
minutes to cool it down.
No picture
• The region number of the disc doesn’t
match the region number of this unit.
The picture is not clear
• Clean the disc.
• The disc is scratched.
• Adjust the LCD’s brightness and contrast
using the VIDEO MODE button on the
remote control.
Loud hum or noise is heard
• The plugs and jacks are dirty. Wipe them
with a cloth slightly moistened with
alcohol.
• Clean the disc.
Troubleshooting
TV Display
Pan Scan
• When wide-screen video is played, this
mode clips the right and left sides of
the image so that it can be viewed on a
conventional screen.
• Some wide-screen DVDs that do not
permit Pan Scan mode playback are
automatically played in letterbox mode
(black bands that appear at the top and
bottom of the screen).
Letter Box
• When wide-screen video is played in this
mode on a conventional screen, black
bands appear at the top and bottom of
the screen.
Wide Screen
• This is the correct mode for playing wide-
screen videos on the unit screen or other
external wide-screens.
Note:
• The displayable picture size is preset on
the DVD. Therefore the playback picture
of some DVDs may not conform to the
picture size selected.
• When you play DVDs
recorded in the 4:3
aspect ratio, the
playback picture will
always appear in the 4:3
aspect ratio regardless
of the TV display setting.
• Select Wide Screen to
conform the LCD screen
on the unit. Always be
sure that your TV display
conforms to the actual
TV in use if you connect
the unit to a TV.
Default
It takes 3-5 seconds to reset
the DVD settings to the
factory default.
Cut off when a
wide-screen video
image is played
Pan Scan
Letter Box
Wide Screen