5
EN
Using the remote control
• Point the remote control at the REMOTE
SENSOR located on the unit.
• When using this unit in bright light, the infrared
REMOTE CONTROL SENSOR may not work
properly.
• The recommended effective distance for using
the remote control is about 16 feet.
To change remote battery
Battery replacement
When the battery becomes weak, the operating
distance of the remote control will be greatly
reduced and you will need to replace the battery.
Caution:
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
G
etting Started
Remove the plastic sheet
before operating the
remote control.
1. Open the
battery door.
2. Insert one
CR2025 (3V)
size battery.
Important battery information
• Do not mix different types of batteries or new
and old batteries. Do not use rechargeable
batteries.
• In order to avoid any risk of explosion, observe
the polarities indicated inside the battery
compartment. Replace only with the type of
batteries specified. Do not dispose of them
in a fire or recharge them.
• If you are not using the remote control for a
long period of time, remove the batteries.
• Battery should not be exposed to excessive
heat such as sunshine, fire or the like.
Please respect the environment and
prevailing regulations. Before you
dispose of batteries, ask your dealer
whether they are subject to special
recycling and if they will accept them
for disposal.
Illustrations contained in this document are for
representation only.
