5
Chapter 1: Setup and Connections
Connection: DVD + TV
1.
Connect the audio cables to the STEREO AUDIO OUT L (left –
white) and R (right – red) jacks on the back of your DVD
Player, and to the corresponding Audio Input jacks on your
TV (sometimes labeled AUDIO IN
L and R).
2.
Connect the video cable.
A. Basic video connection – Connect the video cable
(yellow) to the TV VIDEO OUT jack on the back of
your DVD Player, and to the Video Input jack on
your TV (sometimes labeled VIDEO IN).
– OR –
B. S-Video (optional) – If your TV has an S-Video jack,
connect an S-Video cable (not provided) to the S-
VIDEO OUT jack on the back of your DVD Player
and to the S-VIDEO jack on your TV.
Note: If your TV has component video (Y, Pb, Pr) jacks, use
video-grade cables (not provided) to connect the TV to the
DVD player (Y to Y, Pb to Pb, etc.). It is essential to match
the color coded connectors with a compatible TV.
3.
Connect the AC power cord into an AC outlet.
4
. Connect your cable or off-air antenna to your television as
you normally would. You may need to consult your
television manual for details.
Go to page 8
OPTICAL
COAXIAL
Y
Pb
Pr
S-VIDEO OUT
L
R
1
2
STEREO
AUDIO
OUT
TV
VIDEO
OUT
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUT
VIDEO
AUDIO
L R
S-VIDEO
CABLE/ANTENNA
Back of TV (example)
CABLE
OR
OFF-AIR SIGNAL
Back of DVD Player
The back of your TV and VCR might look different than the
ones pictured here.
Details about the different kinds of cables used to connect
your DVD player are on page 55.
- OR -
15909460 5/17/02 12:37 PM Page 5