Chapter 1: Advanced Information
Illustrations contained in this document are for representation only.
7
Rear Panel
Item
Description
12 VDC
Power connector
REBOOT EMTA
Reset EMTA
TEL 1/2 and TEL 2
RJ-11 Phone set connector
ETHERNET Ethernet
10/100BaseT RJ-45 connector
CABLE F-Connector
Installing the Battery
This section provides information on installing batteries into the EMTA. Follow the steps
below:
1.
Ensure the power adaptor is unplugged.
2.
Remove the battery cover on the rear panel. There are two battery
compartments. You may install a single battery into either compartment.
Please note that the center battery-retention slider must be positioned to allow for
battery insertion. After insertion, the slider should be moved back to the center
(retaining) position.
