16
Chapter 1
Chapter 1: Connections and Setup
Fig. 15
Fig. 14
•
USB - When Receive, Cable-Link, and USB are flashing, the modem is now communicating
start-up data both downstream and upstream.
•
WLAN - When Receive, Cable-Link, USB, and WLAN are flashing, the modem has received
its IP address and is downloading its configuration file from the Internet Service Provider
(ISP).
•
Test - When Receive, Cable-Link, USB, WLAN, and Test are flashing, the modem
configuration is complete. It is registering its “as-configured” setting with your Cable
Operator. Once complete, all LEDs stop flashing and the Power indicator stays on.
Mandatory User Configuration
This feature allows you to configure the gateway to function in your network and gain access to
the Internet through your cable company. Your ISP may require the use of a Host Name and
Domain Name. You will need to get the setup information from your ISP. If you do not have this
information, please contact your ISP before proceeding.
The instructions from your ISP will tell you how to set up your PC for Internet access.
Also, you must disable any Internet log-on software (such as Ivasion Winpoet or Enternet 300)
and any firewall software (such as ZoneAlarm and Watchdog) on all of your PCs.
1. Open your web browser. (It’s all right if you get an error
message at this point. Continue following these directions).
Enter
http://192.168.100.1
in the browser’s Address field if
your gateway is in the CM Mode, or http://192.168.0.1 if it
is in the RG or CH Mode. Press the
Enter
key.
2. An Enter Network Password window appears (for Windows
XP users, the screen may look different). Leave the User
Name field empty, and enter
admin
in lowercase letters in
the Password field (
admin
is the default password). Then,
click the
OK
button.
16096620 DCW615. 01 Connect
3/21/03, 4:58 PM
16
