10
EN
Connections
C. Using USB port
You can connect a USB flash drive (not included) to the USB port on the unit to play picture files.
For operation of file playback on the USB flash drive, please refer to the section “Playing Picture Files”.
Note:
• It is recommended that the product is turned OFF when you plug in a USB flash drive.
• It does not support USB hard disk mass storage devices, multi-card readers and other USB computer peripherals.
• It only supports USB flash drives (FAT32/16, max. capacity 32G bytes, max video bitrate is 7Mbps).
• Make sure your USB flash drive is FAT16/FAT32 file system. All other file systems will not be supported.
• The USB port may also be used for enabling BD-Live content.
D. Connecting to a wired network router
Connect an Ethernet cable (not included) (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of
your unit and to an Ethernet jack on a network hub or router.
Note:
• Do not connect a modular phone cable to the ETHERNET jack.
• When plugging or unplugging the cable, hold the connect on the end of the cable. When unplugging, do not pull
on the cable. Press down the lock tab and pull the connector out of the jack.
• Because there are various connection configurations, follow the instructions from your internet service provider.
Once connected to a home network with access to the internet, you can:
1. Access BD-Live content during playback of BD-Live-enabled Blu-ray Discs (Flash drive needed)
2. Access Netflix movie service (appropriate level of Netflix membership required).
3. Perform Product Software Updates direct from the internet.
Note:
• Connect a USB Flash Drive (with 1GB or more free space on it) to the USB port on the front of the player for
BD-Live operation.
• Ensure your Home Network is operating correctly, ensure you have a connection to the Internet. Follow the
instructions from your Internet Service Provider, or your Home Network's Router Manual on testing your
Home Network's operation.
E. Using Netflix
You can instantly watch movies & TV episodes from Netflix streamed over the internet to your TV via the
unit.
Activating your player
You must activate your player before you can use it to watch movies streamed over the internet from Netflix.
1. To watch movies and TV episodes instantly from Netflix, you must be a Netflix member.
If you are already a member of Netflix, this step is not needed (skip to next step).
On your computer, visit:
www.netflix.com
Follow the instructions to become a Netflix member.
2. On the player, select the Netflix option on the Main Menu screen.
3. Follow the on-screen instructions until you see an activation code appear on the screen.
4. On your computer, visit:
www.netflix.com/activate
You need to log into your account.
5. Enter the activation code, and click [Activate] icon.
BRC11082_ENG IB_20100902.indd 10
9/3/2010 10:27:07
