Before You Begin
Important Antenna Notes
The ANT806 antenna system is designed to work properly when the power injector is
connected to the antenna through a 75-ohm coaxial cable, such as RG6 or RG59.
The coaxial cable between the power injector and the antenna is used for:
• Carrying DC power from the power injector to the amplifier board in the antenna.
• Carrying the amplified TV signal from the antenna through the power injector to the video
equipment.
If any devices are used in your home cabling system, such as amplifiers, splitters, combiners,
matching transformers or 300-ohm cable, they must be connected only between the power
injector and your video equipment. Any devices connected between the power injector and the
antenna might cause a short in the amplifier power source. If this happens, the signals to your
video equipment (multiple TVs or VCRs) may be significantly degraded.
ANT806 Hardware
The ANT806 antenna package includes the following items:
1 ANT806 antenna
1 Bracket
1 AC Adapter/DC Power injector
2 U-bolts
2 V-brackets
2 L-brackets
1 15’ roll of RG59 cable
4 Wing nuts
6 1/8” screws and washers
2 2” Wood screws
1 Weather boot
ANT806_IB_01.indd 4
5/2/07 3:29:26 PM
