Chapter 3
15
Graphics contained within this publication are for representation only.
Using the TV’s Features
4. Choose which channel you want to set:
Set VCR1
Lets you set up the channel the TV tunes to when you press the VCR
button.
Set VCR2
Not available with your remote control.
Set SAT/CABLE
Not available with your remote control.
Set DVD
Lets you set up the channel the TV tunes to when you press the DVD
button.
5. Press the right arrow button to select the choice that matches the way you
have the component connected to this TV.
The choices and a brief explanation follow:
N/A
Choose this if you don’t have this particular component
connected to the TV, or if you don’t want the TV to
automatically tune to the correct channel when you’re using
this component.
CH02
(SAT/CABLE only- Not available with your remote
control).
CH03 or 04
Component is connected to the TV ANT jack on
the back of the TV, and you want the TV to tune to channel 3
or 4 when you press the corresponding button on the
remote. Reminder: make sure the component’s Channel 3/4
switch is set to the appropriate channel.
VID1
Component is connected to the VIDEO jack on the
back of the TV and you want the TV to tune to a video input
channel when you press the corresponding button.
SVID
Component is connected to the S-VIDEO IN jack on
the back of the TV and you want the TV to tune to a video
input channel when you press the corresponding button.
FRNT (Front Video Input)
Component is connected to the
VIDEO jack on the front of the TV and you want the TV to
tune to the front video input channel when you press the
corresponding button.
Go Back
Set VCR1
Set VCR2
Set SAT/CABLE
Set DVD
AUTO TUNING
VID1 . . .
VID1 . . .
CH02 . . .
CH03 . . .
Parental Controls and V-Chip
The choices in the
USA V-CHIP
menu involve software inside your TV (referred to as
V-Chip) which allows you to block TV programs and movies based on violence, sex,
or other content you may believe children should not view.
Once you block programs, you can unblock programs by entering a password.
By default, the software inside your TV is turned “off.” For instructions to turn on
V-Chip, go to page 21.
1616332A.03_Features
4/22/04, 4:05 PM
15
