27
Pre-Dialing
1. With the phone idle, manually enter the telephone number.
The maximum pre-dialing
number length is 32 digits, if the number is over 32 digits, it will emit an error tone.
The
telephone number shows in the display.
2. Press the
DIAL
Soft key (on base only),
Spk
button,
Talk
button (handset only), or
line
1
or
line 2
button to take a line, or pick up the corded handset (on the base only) and
then the telephone number will be dialed out.
Answering a Call
For cordless handset:
1. Press the
Talk
button to answer the call in receiver mode,
-OR-
2. Press the
Spk
button to answer the call in speakerphone mode,
-OR-
3. Press the corresponding
LINE
Soft key to answer the call in receiver mode.
4. When
fi
nished, press
end
button.
For the base:
1. Pick up the corded handset,
-OR-
2. Press the
speaker
button to answer the call in speakerphone mode,
-OR-
3. Press the corresponding
line
button to answer the call in speakerphone mode,
-OR-
4. Press the
headset
button to answer the call in headset mode.
5. When
fi
nished, hang up the corded handset or press
Spk
button (in speakerphone) or
headset
button (in headset mode) to end the call.
NOTE: If you have set the Auto Answer as On in the cordless handset, you can
answer the call directly by picking up this handset from the charger, without
pressing any buttons.
NOTE: Adjust the volume by pressing the vol (- or +) button during a call.
Switching Between the Speakerphone, Handset, and
Headset Mode
Base
To switch to the speakerphone, press
speaker
button. The speakerphone indicator
illuminates.
Place the handset back into the cradle.
To switch to the corded handset, pick up the handset. The speakerphone or headset
indicator
will turn off
.
