Register
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to
Register
.
2. Press
SELECT
Soft key. The screen displays
Press base unit page button until beep
.
3. Press and hold the
page
button on base for 5 seconds.
4.
Registration
displays to indicate the base is now in registration mode.
5. If the registration is successful, the handset shows
Registration complete
for 2
seconds and emits a con
fi
rmation tone.
6. If the registration is failed (i.e. timeout), the handset shows
REGISTRATION FAILED!
for 2
seconds and emits an error tone.
Remove Handset
De-registration cancels registration. During the de-registration process, keep the handset
near the base.
WARNING: It is not recommended that a handset be deregistered unless
absolutely necessary because once a handset is deregistered, that
handset’s telephone features cannot be used until the handset is
re-registered.
From the Phone Setting Menu:
1. Press the
VOL
(- or +) button to scroll to the
Remove handset
.
2. Press
SELECT
Soft key. The screen displays
Remove handset?
.
3. Press the
YES
Soft key to con
fi
rm de-registration. The screen displays
Saved
and then
shows
Press REG to initiate registration
in the handset.
NOTE: You can press the REG Soft key to enter the registation mode again.
De-Register
(only applicable for base)
From the Phone Setting Menu:
1. Press the
vol
(- or +) button to scroll to the
Deregistration
.
2. Press
SELECT
Soft key. The list of all registered handsets will be shown, and use the
vol
(- or +) button to scroll to your selection.
3. Press the
SELECT
Soft key. The screen displays
Remove handset?
.
4. Press
YES
Soft key to con
fi
rm de-registration. The screen displays
Saved
and then
shows
Press REG
to initiate registration
in the handset.
18
