RC-Timing RCM Signal, Руководство пользователя

Страница: 3 / 21

RCM Signal User Manual
(Version 2.0.1.1)
Page 3
1 Introduction
RCM Signal controls traffic lights and a audible horn. You can use RCM Signal when
you have bought an RCM Signal Controller from RC-Timing.
RCM Signal needs the timekeeping software RCM Ultimate or other programs from
RC-Timing like RCM Advanced or RCM Professional.
This User manual describes the installation of RCM Signal with RCM Ultimate.
RCM Signal can be connected to other programs from RC-Timing, which support
RCM Signal, in a similar way.
2 RCM Signal Converter/Hardware
RCM Signal is used either with the 8-way relay board from Conrad Electronic
(order-no. 19 77 30 - 62. The connection to the computer is described in the
manual for the board. Please note, that the jumpers JP2 and JP3 are set in RS232-
mode. JP1 must be set to 1-2 cause RCM Signal only communicates with one
board.
Further on, RCM Signal can be used with the the 8-way relay board from Devantech
(order-no. ETH-RLY16). Regarding the settings of this board please refer to the
manual you get with the relay board.