RC-Timing RCM Signal, Руководство пользователя

Страница: 13 / 21

RCM Signal User Manual
(Version 2.0.1.1)
Page 13
6.2.3 Signal/Relay Module
On Top you are selecting the Relay Board you are using. When selecting the Conrad
board, you have to set the number of the RS232-Port below.
All other settings should not be changed. They have to be set to
Baud 9600
Data bits 8
Stop bits 1
Paritiy bits None
SW Flow None
HW Flow None
When selecting the Devantech Module, you have to type in the TCP/IP-address of
the module. Do not chnge the number of the TCP/IP Port.