RC Product Designs TC3-O V2, Инструкция по эксплуатации

Страница: 3 / 16

Page 3
TC3 “O” V2
RC Product Designs
Tools Required
⇒ Allen wrenches: 1/16" and 3/32"
⇒ Molded tools from Associated
#6956
⇒ Dremmel Cutting Tool & File
⇒ Pencil
⇒ 1/8” & 3/16” drill & 82 degree
Countersink ¼” diameter
⇒ Needle-nose pliers
Warning!
It is recommended to always wear
Eye Protection when using any
Power Tools and a Dust Mask if
grinding/sanding plastic, graphite
or metal parts.
Recommended Tools:
⇒ 3/32" driver
⇒ 1/16" driver
⇒ 3/16" nut driver
⇒
11/32" nut driver
Parts you will need to complete the kit:
⇒ R/C 2-channel surface frequency radio system.
⇒ Battery pack (6 cell).
⇒ Electronic speed control.
⇒ R/C electric motor.
⇒ Pinion gear, size to be determined by type and wind of motor you will be
using.
⇒
Your donor TC3 chassis.
⇒ Associated B4 Buggy Shocks or other suitable buggy shocks.
⇒ 4WD Off-Road Tires.
⇒ Steering & Camber Link Turnbuckles
⇒ One trapped end/eyelet for the steering link end on the bell crank.
Recommended upgrades:
⇒ Replacing plastic steering knuckles with Aluminum ones
⇒ Replacing plastic center shaft drive cups with Aluminum ones
⇒ On tight technical tracks use a front one-way (Associated P/N: 3978) or a
mid-shaft one-way (aftermarket).