RC Mowers TK-44E Скачать руководство пользователя страница 4

Страница: 4 / 42

SAFETY

Read these safety rules and follow them closely.

Failure to follow these rules could lead to loss of

control of unit, severe personal injury or death to you

or bystanders, or result in damage to property or the

machine.

PRACTICES AND LAWS

Practice usual and customary safe working

precautions. Learn applicable rules and laws in your

area. Always follow the practices set forth in this

manual.

EMISSION CONTROL SYSTEM

This equipment and/or its engine may include

exhaust and evaporative emissions control system

components required to meet U.S. Environmental

Protection Agency (EPA) and/or California Air

Resources Board (CARB) regulations. Tampering

with emission controls and components by

unauthorized personnel may result in severe fines or

penalties. Emission controls and components can

only be adjusted by RC Mowers or an authorized

engine manufacturer's service center. Contact

RC Mowers concerning emission controls and

component questions.

REQUIRED OPERATOR TRAINING

Read and understand the Operator's

Manual and decals on the unit. This

information is for your safety and the

proper use of your equipment.

Failure to follow these instructions and warnings may

cause death or serious injury. If you have purchased

this product from an RC Mowers dealer, the dealer

can provide you with training.
Familiarize yourself and any other operators with all

controls and the safe use of the features of this unit.

If you loan, rent or sell this product to others, provide

them with all manuals.
If you have any questions, please contact us at

888-700-4044 or online at rcmowersus.com. Do not

use this equipment if, after reading the Operator's

Manual and the on-board decals, you have any

questions about the safe use of this product.

WARNING:

Avoid Injury

This cutting machine is capable of

amputating body parts and throwing

objects. Failure to observe the safety

instructions in the manual and on decals

could result in serious injury or death.

ALWAYS disengage blades, stop unit

and engine, remove key, set parking

brake, and allow moving parts to stop

before leaving operator’s position

SAFETY ALERT SYMBOL

This is the safety alert symbol. It means:

•

ATTENTION!

•

YOUR SAFETY IS INVOLVED!

When you see this symbol:

•

BECOME ALERT!

•

OBEY THE MESSAGE!

SIGNAL WORDS

The safety alert symbol above and signal words

below are used on decals and in this manual. Read

and understand all safety messages.

1. Danger

DANGER:

Indicates an IMMINENTLY

HAZARDOUS SITUATION If not

avoided, WILL RESULT in death or

serious injury.

2. Warning

WARNING:

Indicates a POTENTIALLY

HAZARDOUS SITUATION If not

avoided, COULD RESULT in death or

serious injury.

3. Caution

CAUTION:

Indicates a POTENTIALLY

HAZARDOUS SITUATION If not

avoided, MAY RESULT in minor or

moderate injury. It may also be used to

alert against unsafe practices.

Содержание TK-44E











































Результаты поиска

Содержание TK-44E

Отзывы:

Похожие инструкции для TK-44E

Бренды по названию

Популярные бренды

RC Mowers TK-44E, Руководство пользователя

Результаты поиска

Содержание TK-44E

Отзывы:

Похожие инструкции для TK-44E

Бренды по названию

Популярные бренды