RC Logger 88002RC, Руководство по эксплуатации, Страница: 11 / 40

11
7. fInal asseMbly
assembly of the radial arms
1. The model is delivered in flat-pack form. Firstly, click the four radial arms (1) into flying position.
2. Then squeeze the clips on the central frame (2) slightly apart from one another and click the radial arms
upwards (definite clicking into place noticeable).
3. Should you wish to dismantle the radial arms again for transportation, you should press the clips on the
central frame slightly apart from one another to avoid tearing.
Should you not wish to dismantle the radial arms again for transportation, you can also
permanently affix these using superglue or cable clips.
assembly of the landing legs
1. Click the landing legs (1) into flying position. Definite clicking into place of the retaining clips (2) into the
slots should be noticeable.
2. For folding, you should slightly push the retaining clips (2) into the slots using a small screw driver, in
order to avoid breaking the plastic parts.
3. A red direction indicator is mounted to one of the landing legs. This direction indicator should always be
considered as the “in front” flight direction.