17
Adjust saddle height
WARNING
A not completely closed quick-release lever
can open again. This can cause the saddle
to move down while driving. This can lead to
serious falls.
the flip of the quick release lever must go so
hard that it requires the palm of your hand.
Only then the tension is strong enough.
make sure that the saddle cannot be pulled
out more than the mark (3).
- Release the quick-release lever (1),
determine the seat height and tighten the
lock.
- By adjusting the nut (2) on the quick
release lever, the clamping force can be
regulated.
The quick release lever (1) must be with
close noticeable backpressure.
Adjust saddle
The saddle can also be tilted and
adjusted in the longitudinal direction.
- Loosen the screw (1).
- Place the saddle in the desired
horizontal position or move it forwards
or backwards and tighten the screw (1).
NOTE
To avoid seat discomfort, the saddle
should be adjusted as level as possible.
