11
◆
Battery Power barSettings
VOLrepresents voltage settings.Each
barrery presents a voltage value.5 bars
voltage values must be entered one by one.
For example, VOL 1 is the first bar voltage
value, the default value is31.5V.
To set battery power bar, press
UP/DOWN to increase or decrease the
number.
To store a changed setting and access
the second bar, press MODE button.
By analogy, after 5 bars voltage values
is entered, hold MODE to confirm and return
to the previous menu.
Battery Power Bar Settings
Personalized Parameter Settings
Personalized Parameter Settings can
match various requirements in use. There
are 8 settings items, such as Power
assistant level Settings, Slowly Start up
Settings, Power- on Password Settings and
Exit settings.
Hold UP and DOWN button more than 2
seconds to enter general settings, then use
the same manner to enter personalized
parameter settings selection interface.
Press UP or DOWN button to choose the
personalized parameter settings items, then
press MODE button to enter the
corresponding settings interface.
Personalized parameter settings Interface
◆
Power Assistant Level Settings
Power Assistant Leveloption
In assistance level settings, there are 8
modes to select: 0-3, 1-3, 0-5, 1-5, 0-7,
1-7,0-9 , 1-9. The default mode is0-5.
To select the mode of assistance level,
press UP/DOWN to increase or decrease
until the desired setting is displayed.
To store the changed setting and access
the PAS ratio settings page, press MODE
button.
PAS Mode option Interface
