R A Z O R B A C K O F F R O A D . C O M
8
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
Installation Instructions
Fig. 1
Fig. 2
The following are general instructions for installation
of the Can-Am® Maverick Trail/Sport Front Folding
Windshield
Begin by removing the vented hood insert from the
Maverick and removing the 2 bolts located near the
back. (Fig. 1)
Install the “Bottom Windshield Plate” aligning the
hole with the bolt holes of the bolts already removed.
Use the factory bolts to secure the “Bottom Wind-
shield Plate” in place. (Fig. 2)
