R A Z O R B A C K O F F R O A D . C O M
12
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
Mount the windshield supports using a 7/16ths
wrench and a #3 Phillips head screwdriver with the
provided hardware. (Fig. 12 & Fig. 13)
1/4” - 1” SS Truss Head (10)
1/4” - 20 Flange Nylock Nut (10)
Mount the windshield by aligning it with the “Top
Windshield Plate” and the “Bottom Windshield
Plate” and attaching hinges that will allow the
windshield to move up and down. Secure with Truss
Head Screw and Nylock Nut. (Fig. 14) Do not over
tighten hardware, if hardware is overtightened the
windshield will not hinge properly.
1/4” - 1” SS Truss Head (2)
1/4” - 20 Flange Nylock Nut (2)
Fig. 12
Fig. 14
Fig. 13
