5
Specifications
Model
Power Supply:
Rated Output Power:
Frequency Response:
Minimum Impedance:
Bluetooth
®
/DSP:
Bluetooth
®
Range:
Dimensions:
Weight:
BT-100
AC 110V ~ 240V 50/60Hz
100W (50W x 2) @ 4 Ohms
50W (25W x 2) @ 8 Ohms
20Hz ~ 20kHz
4 Ohms
Bluetooth 4.1 Qualcomm
®
aptX
™
CODEC Technology/
24 bit Qualcomm
®
Kalimba
™
DSP
33 feet (10 Meters)
7-1/2” W x 5-1/2” D x 2” H (190mm W x 139mm D x 52mm H)
2.87 lbs. (1.3 Kg)
No power.
No sound.
Suddenly no sound
during operation.
Poor sound.
LED off.
Unable to pair
Bluetooth
®
device.
1. Power cord is disconnected.
2. Poor connection at the power socket or the power
socket is inactive.
1. Switch source input from Bluetooth
®
to Optical, or any other
source, and back to Bluetooth
®
to refresh the signal connection.
2. The speakers are disconnected.
3. Volume control set to lowest setting.
4. Check for damaged signal cables.
5. Check if the LEDs are blinking. If not, power cycle the amplifier
and ensure the LED display is in standby. If the amplifier still
doesn’t work, contact RBH Sound Customer Service.
1. Check if the audio source works.
2. Product may have entered into over-heat protection mode, check
if LED is orange. If orange, let amplifier cool down and it will
automatically restart.
1. Audio source problem.
2. Bad or incorrect speaker connection.
1. Check if the amplifier is connected to the power outlet, confirm
power with a voltage meter.
Push the Bluetooth
®
pairing button after amplifier is powered on.
See illustration on page 2 for location of Bluetooth
®
pairing button.
Troubleshooting
Probable Cause:
Situation:
