CONNECTING THE AMPLIFIER:
• Connect your self-powered
subwoofer to SUB OUT.
• Connect your CD player or
other media player with an
RCA cable to the AUX IN L/R
input. Make sure you connect
the “L” plug to the left input
channel and the “R“ plug to
the right input channel.
• Connect an additional external
amplifier with an 1.8-inch
stereo cable to the LINE OUT.
• Connect a portable device such as a phone, tablet or media player with an 1/8-inch stereo
cable to LINE IN.
• Connect your DVD player or other optical digital audio source with an SPDIF optical cable
to the OPTICAL IN input.
• Connect your speakers to the SPEAKERS OUTPUT. Make sure you connect the -/+ and the
L/R cables to the correct output.
NOTE:
Remember to select the desired source by either pressing the Volume Knob/Input
Selector button or by aiming the remote control at the amplifier and pressing the desired
source button. See illustration of remote control on previous page.
OPERATING THE AMPLIFIER:
1. Connect the power cord to the back of the amplifier then connect it to a power outlet.
2. Connect your devices to a suitable input, see the illustration above.
3. Turn the power switch to the On position; the unit will enter working status and the
power indicator LED will turn orange and will default to the Bluetooth
®
input when turned
on for the first time.
4. Press the Bluetooth
®
, OPT, LINE or AUX button on the remote or press the amplifier’s
volume knob to choose an audio source, see illustration of remote on the previous page.
5. Control the playback via the remote control.
WARNING:
The amplifier will shut off automatically if the temperature exceeds 85°C,
and the power indicator will turn orange. The amplifier will re-start automatically when
the temperature has dropped below 60°C ±10°.
6. To put the amplifier into standby mode, push the power button on the remote control or
hold down the volume control knob on the amplifier for 2 seconds. The power LED will
turn red.
7. To take the amplifier out of standby mode, push the power button on the remote or hold
down the volume control knob for 2 seconds. The amplifier will default to last previously
used input.
BLUETOOTH PAIRING:
1. Press the Bluetooth
®
button (
) on the BT-100 to switch to the Bluetooth
®
input and
activate pairing mode (Bluetooth
®
input LED will flash quickly).
2. Activate Bluetooth
®
on your phone or tablet and scan for new Bluetooth® devices.
3. When your phone or tablet finds “RBH BT-100”, choose this unit to begin pairing.
3
Connecting and Operating the Amplifier
