USAGE
REPAIR AND MAINTENANCE
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
5
WARNING:
Pulling the
Spark Bar Handle upwards
too strenuously may cause loss
of control.
NOTE: Sparks and Spark
cartridge life will vary based
on the amount of pressure
applied by Spark Bar Handle,
the length of time pressure is
applied and the smoothness
of the riding surface.
WARNING:
Do not attempt
to replace the cartridge immediately
after riding as cartridge will be hot.
Handle only when cool.
WARNING:
Keep fingers
clear of Spark Bar hinge.
1
Pull back on the Spark Handle to operate
sparking feature.
NEVER push down directly on the Spark Bar,
Spark Cartridge or Spark Cartridge Cover itself.
Using the Spark Bar Handle
Cleaning
Wipe with a damp cloth to remove dirt and dust. Do not use industrial cleaners or solvents, as they may damage the
surfaces. Do not use alcohol, alcohol-based or ammonia-based cleaners, as they may damage or dissolve the plastic
components or soften the decals or decal adhesive.
Replacing the Spark Cartridge
Friction during sparking will eventually wear out the replaceable cartridge and cause the trike to stop making sparks.
Worn out cartridges should be replaced.
Wheels and Bearings
Under normal circumstances and conditions, Razor wheels and wheel bearings are maintenance free. Nonetheless, it
is the responsibility of the owner or guardian to periodically inspect the wheels for wear and tear, the axle for proper
tightness, bearings for side-to-side play, and for loose parts. When a wheel develops play, this is an indication of
excess wear and replacement is necessary. Replace immediately with only genuine Razor wheels. Worn wheels/
bearings are considered normal wear-and-tear and are not covered by the Razor Warranty. Wheels other than
genuine Razor wheels may not be compatible with your Razor scooter. The use of anything other than genuine Razor
replacement parts may affect your safety and will void your warranty.
Replacement Parts
The most frequently requested replacement parts are available for purchase at some Razor retail partners.
For the complete selection of replacement parts visit www.razor.com.
Repair Centers
For a list of authorized Razor repair centers:
• Check online at www.razor.com.
• Additional Customer Service contact information is listed at the back of this manual.
1
Using your thumbs, press tabs
on both sides of the cartridge to
release from the bracket. Slide the
cartridge away from you and
remove from bracket.
2
Place new cartridge in back of the bracket making sure to align the slots on
the cartridge with the two legs of the bracket. Slide the cartridge forward until
you hear a click and the thumb tabs are locked in place.
