2
Need Help?
Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
BEFORE YOU BEGIN
Remove contents from box and check parts against parts diagram found on page 14. Remove the separators that
protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint or
dents that may have occurred during shipping. Because the DXT was partially assembled and packed at the factory
there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Allow up to 15–20 minutes for assembly.
Two (2) person assembly recommended
.
WARNING:
DO NOT
USE NON-RAZOR PRODUCTS
WITH YOUR DXT. The DXT has
been built to certain Razor design
specifications. The original
equipment supplied at the time
of sale was selected on the basis
of its compatibility with the
frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void
your warranty.
WARNING:
Safety flag
is intended to increase rider’s
visibility to others. Do not bend
excessively (flag can break if
over stressed) nor remove from
bracket when riding.
Required Tools
Two (2) 5 mm Allen Wrench
6 mm Allen Wrench
13 mm/15 mm Wrench
Box Contents:
• DXT Drift Trike
• Tools
• Owner’s Manual
Product ID Locations:
See locations to the left
1. Frame (underneath unit)
2. Box - Side of UPC (not shown)
Front Wheel Assembly
Rear Drifter Wheels
Brake Lever
Seat
Flag
1
L
R
