8
Need Help?
Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
2
Using two 19 mm wrenches,
loosen both axle nuts.
5
Reattach the chain guard.
Test ride and check. Readjust as
needed.
3
Push the chain tensioner down
to loosen the chain and remove
the chain from the wheel sprocket
and motor sprocket. Push and
remove the wheel downward.
Note:
Your hands will get greasy
doing this.
1
Loosen screws and remove
chain guard.
4
Install the new chain or wheel
by slipping the chain around the
axle. Slide the axle into the slots
on the frame. Slide the chain
tensioner down and maneuver the
chain onto the rear sprocket and
motor sprocket.
Replacing the Chain and Tire
Tools required: Phillips screwdriver and two (2) 19 mm wrenches.
Note:
the arrangement of the
hardware sequence:
Right Side (Throttle)
16-1 Nut
16-2 Washer
Frame
16-3 Spacer
Left Side (Brake)
16-1 Nut
16-2 Washer
Frame
16-3 Spacer
16-1
16-3
16-2
16-2
16-3
16-1
REPAIR AND MAINTENANCE
