razberi technologies
™
42
7.2.8
Application (Compact Fixed Dome Excluded)
The Application setting can be found under this path:
System> Application
.
The IP Camera equips one alarm input and one relay output for cooperating
with alarm system to catch events’ images. Refer to alarm pin definition below to
connect alarm devices to the IP Camera if needed.
Alarm Pin Definition
Please refer to
User’s Manual
for Alarm Pin Definition to connect the alarm
devices.
Alarm Switch
The Administrator can enable or disable the alarm function.
Alarm Type
Select an alarm type, <Normal close> or <Normal open>, that corresponds with
the alarm application.
Alarm Output
Define alarm output signal <high> or <low> as the normal alarm output status
according to the current alarm application.
Triggered Action (Multi-option)
The Administrator can specify alarm actions that will take when the alarm is
triggered. All options are listed as follows:
Enable Alarm Output
Select the item to enable alarm relay output.
IR Cut Filter
Select the item and the camera’s IR cut filter (ICR) will be removed (on)
or blocked (off) when alarm input is triggered.
Note:
The IR Function (Refer to
IR Function
) could not be set as
<Auto> mode if this triggered action is enabled.
Send Alarm Message by FTP/E-Mail
Содержание DV200
Страница 1: ...Full HD Multi Stream Vandal Proof Dome IP Camera DV200 DV200L DVO200 DVO200L User Manual Ver 4 17 ...
Страница 18: ...razberi technologies 17 352 x 240 30fps ...
Страница 46: ...razberi technologies 45 ...
Страница 77: ...razberi technologies 76 Step 3 Click on the button to save the defined preset point ...