background image

14 

Raz-AP/SP Dealer Manual 
20170110 

 

4.0       USE AND OPERATION

 

 

4.1 Casters 

Each Raz Shower Chair caster is equipped with a dual-lock 
feature, which stops the caster from swiveling and rolling 
simultaneously. To activate the dual-lock, step on the end of the 
caster brake lever until it latches in the 

“on” position. To 

deactivate the dual-lock, step on the raised end of the dual-lock 
until it latches in the 

“off” position.

 

 

 

5.0    CLEANING AND MAINTENANCE

 

 

5.1 Cleaning After Each Use

 

5.1.1    Commode Pan

 

1.   Remove the commode pan and empty contents. 
2.   Wash the pan with a multi-purpose disinfectant cleaning solution. Use a soft brush if needed. 
3.   Rinse well before storage or re-use. 

NOTE: A soapy hot water wash followed by a disinfectant spray can be substituted for a multi-
purpose disinfectant cleaning solution.

 

 

5.1.2    Molded Seat

 

1.   Spray with a multi-purpose disinfectant cleaner and scrub with a soft brush as required. 
2.   Rinse with a water spray before storage or re-use. 

DO NOT IMMERSE 

the seat in water or cleaning solutions. 

3.   For a more thorough cleaning, remove the seat from the shower chair to allow better access to 

the underside of the seat and around the opening of the seat. 

 

5.2 Cleaning As Needed

 

5.2.1    Adjustable Tension Back Upholstery

 

1.   Remove  the  plastic  buckles  and  tri-glides  from  the  back  upholstery  straps,  paying  attention  to   

how the straps are wound through each component as they are removed. 

2.   Remove  the  back  upholstery  from  the  back  frame  and  machine  wash  with  a  mild  detergent  in 

warm  water  on  a  normal  or gentle  wash  cycle.  Include  other  strap  accessories  such  as  the  H- 

strap, pelvic and chest positioning straps. 

3.   Install  the  back  upholstery  and  other  positioning  accessories  on  the  chair  and  allow  to  dry. 

DO NOT 

dry the back upholstery in a clothes dryer or damage to the upholstery may occur. 

4.   Assemble all plastic buckles and tri-glides onto straps. 
5.   Adjust the straps to the desired tension. 

 

5.2.2    Frame, Armrests, Adjustable Footrests, and Other Components

 

1.   Spray  the  frame  and  components  with  a  multi-purpose  disinfectant  cleaner,  scrub  with  a  soft 

brush and rinse with water. 

2.   If necessary, spray the frame and components with a diluted (10 parts water to 1 part solution) 

calcium/lime remover (such as CLR), scrub with a soft brush and rinse  thoroughly  with  water. 

DO NOT 

mix a calcium/lime removal solution with any other liquid or toxic fumes may result. 

 

It is recommended to the user that a qualified Raz dealer check over all fasteners and subassemblies on 
a continuing basis or if there is cause for concern to the shower chair

’s performance. 

 
Several  times  each  year  the  shower  chair  and  its  components  should  be  wiped  down  with  a  diluted 
calcium/lime removal solution in order to reduce deposits, followed by a hot water rinse. 
 
To reduce the risk of mildew buildup, the entire shower chair should be wiped down with a soft dry cloth 
after the final rinse and before storage or use. 

 

 

Содержание AP
















Отзывы: