1/20/2015 (3:46 PM)
2034vx & 2034vxa v6.0.doc
1.5
Vortex Dust Collector -
The HEPA
dust filter bags inside the dust collector will require
replacing when they become worn or damaged.
Accumulation of dust inside the dust collector
compartment is evidence of bag damage. The dust
collector compartment should be inspected
periodically. Dust escaping bags will exit exhaust
blower creating a possible respiratory hazard.
Never Wash bags to reuse always replace with new
bags.
1.6
Pressure Pot
1.6.1
Failure to follow the procedures in this manual
could result in serious injury or death from the
sudden release of compressed air. NEVER attempt
to open the pressure pot closure mechanism using
the Pressure Pot Closure Lever (L). This could
cause a sudden UNSAFE release of compressed air.
The pressure pot opens automatically when the pot
is depressurized. Never do maintenance on any
component of the pressure pot while the pot is
pressurized. Never apply more than 100psi of
incoming air pressure from the air compressor to the
system. SET incoming air pressure from air
compressor between 80psi to 90psi. Set blasting
pressure regulator on the pot to desired blasting
pressure, normally between 25 psi - 35 psi.
Содержание 2034vx
Страница 1: ... 2034vx 2034vxa Sandcarving System ...
Страница 2: ......
Страница 19: ......
Страница 20: ...RAYZIST COM 800 729 9478 ORDER ONLINE WWW RAYZIST COM STORE ...