26
ST30 Speed Operation and Installation Handbook
6.3 Master/Repeater display
As it leaves the factory, the ST30 Speed is set to operate in Master mode.
In this mode the instrument is connected to a speed transducer and
transmits speed information onto the 'SeaTalk' bus. The ST30 Speed can
be set up as a Repeater, repeating speed information already on the
'SeaTalk' bus. Repeater mode is set as follows:
1.
Press and hold Display and
until the display shows U and a two
figure number.
DISPLAY
TM
SPEED
TRIP
TOTAL
MAXIMUM
AVERAGE
D608
2.
Press Display to display the operating mode.
r0 = Master mode
r1 = Repeater mode
DISPLAY
TM
SPEED
TRIP
TOTAL
MAXIMUM
AVERAGE
D609
