Chapter 4: Maintenance
15
Chapter 4: Maintenance
4.1 Instrument
Certain conditions may cause condensation to appear on the instrument
window. This will not harm the instrument and can be cleared by increasing
the illumination setting to level 3.
Chemical and abrasive materials must not be used to clean the ST30
Speed instrument; if the instrument is dirty, clean with a soft, damp cloth.
4.2 Transducer
Refer to the Installation and Maintenance instructions supplied with the
transducer.
4.3 Cabling
Examine all cables for chafing or damage to the outer shield and, where
necessary, replace and re-secure.
4.4 Advice
For advice, or further information regarding installation of this product,
please contact the Autohelm Product Support Department or your own
National Distributor.
