Raytheon 138-119, Руководство оператора и по обслуживанию

Страница: 19 / 55

COMPASS
STD22
Change Over Box
138--119
13
3769DOC000002
Edition: April 06, 2005
3.1.1 General remarks to establish cable connections
NOTE!
While closing again the housing after a repair or an
installation, the cover has to be set carefully.
The seal may not be crushed, if necessary push the
sidewall slightly.
In order to ensure that the system operates correctly, it is essential to follow the procedures
described below for establishing cable connections.
1. Strip off approx. 180 mm of the cable (depending on the distance terminal board or relay
to the cable inlet).
Make sure not to damage the shielding.
2. Strip off the shielding to a remainder of approx. 15 mm.
approx. 180 mm
approx.
15 mm
Figure 5: How to strip a connection cable