Raytheon Anschütz ECDIS NX Compact, Системное руководство

Страница: 24 / 53

ECDIS NX Compact
2 Installation
10000000559 14 Edition:001
Fig. 5: Panel PC, Cable Entries & Connectors Bottom
Maximum Cable Length
Any cable should generally be kept as short as possible to provide a high quality input/
output. The maximum signal cable length will depend on the signal resolution and
frequency, but also on the quality of the signal output from the computer/radar.
2.1.1.5 Housing / Terminal Block Connector Overview
WARNING!
Danger due to voltage-regulated devices
Risk of death or serious injury that is caused by electrical shock
• Switch off voltage supply if the wires have damaged insulation.
• Only skilled electricians must perform work on the electric system.
• Keep moisture away from live parts.
• Keep the system closed.
• Do not attempt to bypass or disable fuses.
Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-
pin, 5-pin) which plugs into the connector area of the unit. They are mounted by factory
default and delivered with the unit. The housing / terminal block connectors have steering
rails, which ensures that it can not be mounted wrong. The color of these connectors
may vary between black, green and orange depending on manufacturer. You may use
approved equivalents of these connectors, but note that warranty will be void if any
damage would occur to either the unit’s original PCB terminal socket connector or inside
the unit (electronic components, boards etc.).