Raytech USA, Inc. All rights reserved
6
INTRODUCTION
4
–
0
Raytech Digital Micro-ohm meter, Micro-Centurion 2 (MC2), was designed for a high degree of
accuracy for the measurement of very low resistance. This technology was then packaged into a
portable test system for use by apparatus manufacturers, rebuild shops, and electrical
maintenance crews.
Ease of use: This intelligent system has an easy to use operation screen, which allows quick
selection of the current level and resistance level to be measured. The system has the ability to
detect the resistance level and suggest the correct range to select which provides for extremely
accurate results.
Impressive Accuracy: The MC2 is a high precision, fully automatic, microprocessor based
system. This system is designed for highly accurate readings on-site with laboratory precision.
Unique Measuring Technique: This newly designed technique of measurement incorporates a
high precision measurement circuit and modular power source. Extensive filtering and high
precision standards are used within the test system. The system is capable of precision
measurements to 200 A.
Operation: The MC2 applies a preset current level and resistance range selected by the user.
The results of the test are displayed within a few seconds automatically. The results are reported
on the easy to read liquid crystal display and can be stored or printed out.
Compact Design: The MC2 is one of the most lightweight systems available that comes
complete with its own rugged waterproof Fieldcase.
Simple Maintenance: There is No maintenance required. There is No calibration procedure (No
potentiometers to turn). This is due to the utilization of high precision components in the design.
Advanced Protection: Upon powering on the system initializes itself with a self-calibrating,
circuit checking sequence. If any problems are detected during this initialization period, or
during operation, the operator is immediately notified. The system constantly monitors the
condition when turned on. The MC2 has extensive protection built in to the circuitry. This is one
of the many reasons we can extend our warranty to 5 years.
Advantages & Features:
Highest accuracy and Precision of any high current test system
Automatic measurements of Low Resistance from 0.01
...5
Microprocessor based system with internal storage for over 2000 test results
Single or continuous measurements with automatic data storage
User can preset a number of tests, at various timed intervals, for automatic data storage
Printing and Storage of test results while the test system is measuring
Complete automatic calibration system and system diagnostics
Standard Centronics (Parallel) Interface & RS232 (serial) Interface
Pure filtered DC Power source for the highest accuracy readings
Automatic, high efficiency cooling system to dissipate internal temperatures
Automatic shut off for over-temperature condition
Panel mounted Emergency Stop Switch
Wide input power source range
Lightweight and Portable, Less than 33 lbs
5 Year standard warranty
