background image

Raytech USA, Inc.  All rights reserved

18

WARRANTY

14

0

RAYTECH USA, Inc. warrants to the original purchaser of any new MC2, that it will be free
from defects in material and workmanship under normal use and service for a period of 2 years
from the original date of shipment. An additional 3 year extended warranty is provided, at no
cost to the end user, for the products covered under this warranty if the products are returned on
each calendar year from the original date of shipment, prepaid, to Raytech USA, for system
evaluation. Failure to do so will void the additional extended warranty.
The obligation of RAYTECH USA, Inc. under this warranty is limited, in its exclusive option, to
repair, replace, or issue credit for parts or materials which prove to be defective, and is subject to
purchaser's compliance with the RAYTECH USA, Inc. warranty claim procedure as set forth
within this manual.
This warranty covers only those parts and/or material deemed to be defective resulting from

manufacturer’s workmanship. The liability of RAYTECH USA, Inc. shall be limited to the

repair, replacement, or issuance of credit for parts deemed defective within the meaning of this
warranty.  Costs for labor or other expenses that may have occurred incidental to the inspection,
repair, replacement, or issuance of credit for such parts and/or materials shall be the sole
responsibility of purchaser.  This warranty shall not apply to any accessories, parts, or materials
not manufactured or supplied by RAYTECH USA, Inc.

Equipment must be returned prepaid with a Return Material Authorization (RMA) to:

RAYTECH USA, Inc.

or

RAYTECH GmbH

90 C  Randall Avenue

Oberebenstrasse 11

Woodlyn, PA  19094

CH-5620 Bremgarten

USA

Switzerland

Tel. 1 267 404 2676

Tel. + 41 56 640 0670

Fax. 1 267 404 2685

Fax. + 41 56 640 0674

www.RaytechUSA.com

www.Raytech.ch

LIMITATION OF WARRANTY

The foregoing warranty shall not apply to defects resulting from improper and unauthorized
modifications or misuse and abuse of the product, negligence, alteration, modification, faulty

installation by the customer, customer’s agents or employees. Attempted or actual dismantling,

disassembling, service or repair by any person, firm, or corporation not specifically authorized in
writing by RAYTECH USA, Inc.
Defects caused by or due to handling by carrier, or incurred during shipment, trans-shipment, or
other move.
Inadequate maintenance by the customer, second source supplied software or interfacing,
operation outside the environmental limits, or improper site preparation.

Exclusive remedies provided herein are the customer’s sole and exclusive remedies.

RAYTECH USA, Inc. shall not be liable for any damages resulting from the use of this
equipment whether direct, indirect, special, incidental, or consequential damages, or whether
based on contract, tort, or any other legal theory.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED.

Содержание MC2



















Отзывы: