20
rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
VARIO Remote Controller (VRC)
Optional Accessory
Full instructions provided with VRC when supplied
Power Select
Quick and easy selection
of 5 accurately defined
power settings, 1=20%,
2=40%, 3=60%, 4=80%
5=100%. Provides
exact amount of light
required for the scene
requirements.
Photocell Adjust
To select 3 different photocell sensitivity
levels to accommodate different
operational requirements.
Timer Setting
The timer function allows the
illuminator to be triggered
via the telemetry input and
remain on for a pre-defined
period of time.
Photocell Disable
Lamp operates from
telemetry input only
Timer disable
30 mins
10 mins
3 mins
1 min
Selects dimming
function on
telemetry wires.
Note: Reset button will not remove a PIN if one is present
Note: Unless detailed as part of the functionality, if an invalid or blocked command is attempted, both LEDs will
flash RED
LED Status Indicator
Turns status LED’s On or Off and PIN Entry
Selects telemetry Input.
Disable Remote Control
Set-Up
Must be depressed for
4 seconds to lock-in
settings and prevent
further alterations.
Press
again for 4 seconds to
disable manual buttons
- must be done within
5 minutes of remote
disable
Restores Factory
Default Settings.
Must be depressed
for 4 seconds.
