6
Step 5. Photocell following output (White & Yellow)
Volt free output - normally open (day) to normally closed (night).
Connect direct to camera if required to control switchover of day/night
cameras.
Step 6. Programme using optional VARIO Remote Control (VRC) or the
manual control buttons.
Step 7. Set PIN (If Required) (Can only be done with the optional VARIO
Remote Control(VRC)
LED Status Indicators- Feedback system :
There are two tri-coloured LEDs visible on the base of the VARIO2
illuminator. The two LEDs provide important operating and status
information.
The LED Indicators also give feedback if you are using the
Remote, PIN Function or Manual Control Modes – Please see
Pages 10 to 17 for detail on the LED status indicator feedback for
these functions
