2
www.raytecled.com
UK / Europe Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
1. Safety instructions
1. Read this leaflet carefully before commencing to install the SPARTAN unit and retain it
for future use. Installation can only be carried out by suitably qualified personnel.
2. Check the certification and “T” rating to ensure that the mains supply and the ambient
temperature present is suitable for the unit being installed.
3. If the SPARTAN unit is to be installed in areas of high vibration, please consult with Raytec.
4. Externally the SPARTAN unit housing is constructed from marine grade aluminium, and
toughened glass, stainless steel brackets/fasteners and silicone gaskets, internally there
are many non metallic components. The end user must ensure that these materials are
suitable for the environment the SPARTAN unit will be installed in; Zone 1 and Zone 2
Hazardous areas.
5. Check certification nameplate on front of floodlight to ascertain type of threaded cable
entry on the luminaire. Select suitably certified ATEX/IEC Ex /UKEX cable glands and
stopper plugs, these must be parallel thread, have a minium of 5 full thread engagement
and be of a medium/fine tolerance to ISO965-1 and ISO965-3. The cable entry devices
selected must maintain the IP rating of the luminaire.
6. The incoming mains cable should not exceed a temperature rise of 27°C above the
ambient conditions; select suitable cable.
7. When the unit is installed correctly and in accordance with these installation instructions
it will not harm humans or animals.
Eye Safety :
Caution – EN62471 Risk Group 2 Classification - The luminaire should be positioned so that
prolonged staring into the luminaire at a distance closer than 0.230m is not expected
!
Install in a well
ventilated area
Isolate mains before
removing cover
