Raytec PULSESTAR VTS Series, Руководство по установке

Страница: 31 / 38

Report the configuration
ST
This command reports all the channel settings. A typical output is:
CH 1, MD 1, S 100.0 DL 10us, PU 1.000ms, RT
1.020ms, IP1,FL0, CS0.000A, RA24V
Where:
CH
Channel number
MD
Mode: 1 = pulsed; 2 = switched
S
Brightness in percent
DL
Pulse delay
PU
Pulse width
RT
Retrigger delay
ST0
This reports the general settings. A typical output is:
TM 1, TP 20.00ms
Where:
TM
Internal trigger: 0 off; 1 = on
TP
Internal trigger period.
STc
This reports the settings for a single channel.
Where:
c
= 1 for light strobe output
= 2 for trigger output signal
27