background image

ABOUT YOUR WATER HEATER 

 

SAFETY 

 
For your safety do not operate this water heater before reading this instruction booklet. 

This water heater is supplied with a thermostat, hi-limit thermostat and a pressure relief valve. These devices must 
not  be  tampered  with  or  removed.  The  water  heater  must  not  be  operated  unless  each  of  these  devices  is  fitted 
and is in working order. 

Improper  installation,  adjustment,  alteration,  service  or  maintenance  can  cause  injury  or  property  damage.  For 
assistance or additional information consult your Raypak distributor, qualified installer, or Rheem

®

 Service agent. 

The  Raypak  warranty  can  become  void  if  relief  valves  or  other  safety  devices  are  tampered  with  or  if  the 
installation is not in accordance with these instructions. 

 

DO  NOT  store 

flammable  or  combustible  materials

  near  the  water 

heater. Flammable liquids (such as petrol), newspapers and similar articles 
must  be  kept  well  away  from  the  water  heater  and  the  draught  diverter  or 
flue terminal. 

 

DO NOT use 

aerosols, stain removers and household chemicals

 near 

the water heater whilst it is working. Gases from some aerosol sprays, stain 
removers  and  household  chemicals  become  corrosive  when  drawn  into  a 
flame. 

 

DO  NOT  store 

swimming  pool  chemicals,  household  cleaners,

  etc., 

near the water heater. 

 

DO  NOT  place  anything  on  top  of  the  water  heater  or  in  contact  with  the 
flue  terminal.  Ensure  the  flue  terminal  is  not  obstructed  in  any  way  at any 
time. 

 

DO NOT use Propane / Butane gas mixtures in a Propane model. A Propane model is designed to operate on 
Propane  only.  The  use  of  Propane / Butane  mixture,  such  as  automotive  LPG  fuel,  in  a  Propane  model  is 
unsafe and can cause damage to the water heater. 

 

DO NOT operate with panels, covers or guards removed from the water heater. 

 

DO NOT enclose this water heater (applies to external installations only). 

If the power supply cord or electrical conduit to the water heater is damaged, it must be replaced by an authorised 
person in order to avoid a hazard. The power supply cord and plug must be replaced with a genuine replacement 
part available from Rheem. Phone your nearest Rheem Service Department or Accredited service Agent to arrange 
for an inspection. 

Do  not  use  the  water  heater  if  any  part  has  been  under  water.  Immediately  call  Rheem  Service  or  Accredited 
service Agent to arrange for an inspection. 

WHAT TO DO IF YOU SMELL GAS? 

 

DO NOT try to light any gas appliance. 

 

DO NOT touch any electrical switch. 

 

TURN OFF the gas supply at the gas meter immediately, call your gas supplier or licensed gasfitter. 

NOTE:

 Some gases are heavier than air and it may be necessary to check for gas leaks at floor level. 

TO TURN OFF THE WATER HEATER 

If it is necessary to turn off the water heater: 

 

Switch off the electrical supply at the power outlet to the water heater 

NOTE

: If the water heater is correctly installed, this will also shut down the circulating pump. 

 

Close the gas isolation valve at the inlet to the water heater. 

 

Close the cold water isolation valve at the inlet to the water heater. 

 

Close the isolation valves on the cold and hot water branches to shut down an individual water heater in a bank 
(water heating applications only). 

 

 

 

Содержание B0147













































Отзывы: