RAYN Lyda, Инструкция по установке и эксплуатации

Страница: 19 / 24

Power Up Procedure 15
Power Up Procedure
WARNING:
RISK OF ELECTRIC SHOCK! Circuits that are installed
without an accessible power disconnect device cannot be serviced or
operated safely.
AVERTISSEMENT :
RISQUE DE DÉCHARGE ÉLECTRIQUE! Il est
imprudent d'utiliser ou de réparer les circuits installés sans qu'un
dispositif de déconnexion de l'alimentation ne soit accessible.
1. Verify all products in the system are installed according to the specifications.
2. Check all connections to ensure the connectors are secure.
3. If not already completed, connect the provided power input cable to the source.
4. Apply power to the main circuit. As the unit powers up:
•
If no external control (DMX Adapter or third-party 1-10 V controller are installed, the Lyda
lamp head will illuminate to 100% output.
•
If external control is installed, the Lyda lamp head will illuminate to the output level
signaled by the controller. Set the appropriate control level on the controller and verify the
respective light output.
WARNING:
Do not use this fixture with a damaged power cable (cord
set). If the cable is damaged, it must be replaced by a qualified
technician with an equivalent type before use. Contact your local
authorized dealer for spare.
AVERTISSEMENT :
N'utilisez pas ce luminaire si le câble
d'alimentation est endommagé (cordon amovible). Tout câble
endommagé doit être remplacé avant utilisation par un câble de type
équivalent par un technicien qualifié. Contactez votre revendeur agréé
local pour une pièce de rechange.
Operation
The Lyda lamp head receives power and control through the LED driver.
With no external control system, the lamp head has simple On/Off control. You can dim the LED
with an external control system, either a DMX control source such as the RAYN Touch
controller paired with the DMX Adapter or from a third-party 1-10 V dimming controller.
See the RAYN Touch controller User Manual for details to install and configure the system for
control.