Raymarine VCM100, Руководство по установке

Страница: 22 / 58

3.5 Radar scanner data connections
Radar scanner data connection requirements.
• For connections to a C-Series Widescreen multifunction display, a
SeaTalk hs switch or crossover coupler must be used.
• For connections to a G-Series system, a SeaTalk hs switch must
be connected between the radar scanner and the GPM400
processor module.
• For connections to a non-networked E-Series multifunction
display, a SeaTalk hs crossover coupler must be used. An E-Series
network containing more than a single connection requires a
SeaTalk
hs switch.
• The radar scanner must be connected to a SeaTalk hs switch or
crossover coupler using the official Raymarine power and data
digital cable (purchased separately).
• Additional SeaTalk hs cables may be required for connections
between the power and data digital cable and a SeaTalk hs switch
or crossover coupler.
• Do NOT cut and re-join any part of the power and data digital
cable. A range of cable lengths and cable extensions is available
for longer cable runs.
The following diagram illustrates the data connection of the power
and data digital cable:
D11778-1
1
Item Description
1 Data connection — connect to a SeaTalk hs switch or
crossover coupler, as appropriate.
22
HD and SuperHD Digital Open Array Installation instructions