Raymarine ST60 Tridata, Руководство пользователя

Страница: 50 / 54

38 ST60 Speed Instrument Owner’s Manual
Response settings
The response values for both
SPEED
and
VMG
determine the frequency at
which information is updated. A low number provides a smooth response
and a high number a much livelier update.
Use the
timer
(decrement) and
reset
(increment) keys to set the
required value. Response values are from
1
to
15
.
Boat show mode
CAUTION:
Do NOT enable this mode. It must only be used for demonstration
purposes.
Ensure that the Boatshow Mode Use is set to
OFF
. If necessary, use the
timer
or
reset
key to achieve this.
Factory defaults
You can use this screen to reset the operating parameters to the factory
default values. Use the
timer
and
reset
keys to make the required
selection.
Note that the selection you make at this screen will be applied when you
exit the screen, so be sure you make the correct selection.
If you want to apply the factory defaults, ensure the display shows
YES
,
but if you want to retain the current values, ensure that the display
shows
NO
.
Leaving Dealer calibration
Hold down the
speed
and
trip
keys for 2 seconds to save your settings,
exit Dealer calibration and resume normal operation.
PDF test 81037_4.book Page 38 Friday, July 26, 2002 11:08 AM